All projects

Fit-for-purpose, affordable body-powered prostheses is designing upper limb prostheses that are both low cost and fit for their purpose and circumstance. The project is funded through the Engineering and Physical Sciences Research Council (EPSRC) and National Institute for Health Research (NIHR) Global Challenges Research Fund.

Young children everywhere need to be mobile - to be able to explore their world, make choices about what they want to do, who they want to play with, and where they want to go.

GDI Hub is working with Designability to evaluate a new kind of seat that moves with the child and enables them to explore movement while they are seated and well supported

The AT2030 Sub-Programme on “Research, evidence and impact” seeks to understand ‘what works’ and develop a framework for the innovations and policy interventions across the AT2030 programme.

Disability Interaction (DIX) puts disability front and center in the design process, and in so doing aims to create accessible, creative new HCI solutions that will be better for everyone, including poor communities, which disabled people are more likely to be part of.

CROWDBOT will enable mobile robots to navigate autonomously and assist humans in crowded areas, rather than simply stopping when the going gets tough.

Researchers from the Development Planning Unit at UCL, along with Leonard Cheshire, are working with the GDI Hub to undertake an exciting programme working with communities living in conditions of informality (often referred to as slums) in Freetown, Sierra Leone and Banjarmasin, Indonesia.

An EPSRC GCRF project the project tested a new methodology for creating accessible maps for fast changing cities like Delhi. Using embedded sensors attached to wheelchairs, we mapped accessible and difficult to access routes. Initially, the project also aimed to capture rehabilitation metrics whilst pushing a wheelchair beyond a clinical environment, but instead the community of wheelchair users we worked with preferred to use the tool as an advocacy tool.

A research project to understand how and when manual wheelchair users need and use power assistance and to determine if fuel cell technology is suitable for the power requirements of assistive technology, specifically wheelchairs.

This project looked at identity and the changing perception of disabled people and disability. The primary focus was prosthetics and the use of new technologies including 3D printing to democratise prosthetics and allow individuals to customise their assistive devices in a timely and affordable way.

Ongoing research where we have developed a new technique for wheelchair localisation and surface determination using a fusion of GPS/IMU information and machine learning. Data captured helps wheelchair users travel in a more effective ways and share data to demonstrate accessibility issues and encourage improvements.

To address the need gap and significantly scale up the provision of affordable and appropriate Assistive Technology, this sub-programme will test market shaping methodologies which include research, scoping, and future planning; the creation of market shaping tools; and pilot testing of market interventions. This sub-programme is led by the Clinton Health Access Initiative (CHAI).

Funded by UK AID this focused on mapping and analysis of the innovation landscape around Assistive Technology globally with a focus on low and middle-income countries to highlight potential market failures and to scope out possible solutions.

We are very keen to have a mixture of academic and non-academic papers at this workshop therefore, we would like to invite additional contributions in the format of a social paper OR a standard 4-page CHI extended abstract. Social papers are maximum one page in length and act as a CV for networking. These can be submitted by anyone interested in the area of accessibility and gaming. We have extended the deadline to the 1^{st of} October.

The aim of this project to build new low-cost approaches to more reliable mental wellbeing measurements using mobile sensing technology, supporting unconstrained and potentially a variety of everyday situations.

The project focuses on the impact of assistive technology and accessible learning materials in promoting participation of children with disabilities in Uganda. This project aims to provide support to overcome barriers to education through assistive technology and to develop the evidence base for how technology helps inclusion in the classroom.

Talented students are invited to propose a PhD research project in areas related to AI powered Physiological & Affective Computing, with the aim to create novel assistive technology and boost disability innovation.

The PrimeVR2 project is a Horizon 2020 project where commercial, academic and research teams are building a virtual reality platform that will allow people with a hyperkinetic movement disorder, people who have had a stroke, and people with a sports injury to play games and interact in a virtual environment for rehabilitation.

Research that focuses on understanding technology and how it could be used to empower people with disabilities who live in the Global South is sorely needed, yet conducting and planning studies in the field is often challenging.

We want to co-create a long-lasting, sustainable and creative community, made by and for researchers and practitioners from academia, NGOs, and the private sector who are interested in conducting work around technology for people with disabilities living in the Global South. Our unique workshop is designed to support this aim through synchronous and asynchronous activities. Our vision is to spark engagement beyond the boundaries of this CHI2021 workshop.

The dynamic aspects of living with disability, life transitions, including aging, psychological distress, long-term conditions such as chronic pain, and new conditions such as long-COVID affect people’s abilities. Interactions with this diversity of embodiments can be enriched, empowered, and augmented through using multisensory and cross-sensory modalities to create more inclusive technologies and experiences. This workshop will explore three related sub-domains: immersive multi-sensory experiences embodied experiences, and disability interactions and design. The aim is to better understand how we can rethink the senses in technology design for disability interactions and the dynamic self, constructed through continuously changing sensing capabilities either because of changing ability or because of the empowering technology.

AT2030 (Assistive Technology 2030) brings together partners who haven’t traditionally focused on assistive technology (AT), with experts, innovators and AT users to experiment with new ideas and thinking.

GDI Hub Academic Research Centre provides robust evidence of the effectiveness of the AT2030 projects to drive evidence and knowledge.

Designing a new way to produce erasable tactile drawings and graphics to present visualisations to blind and partially sighted students and professionals. The project uses smart materials and research on ways to make them operational. The final output will be particularly useful to understand STEM subjects and to express and communicate ideas and creativity.

PhD student Kate Burton​ is conducting research on using 3D imaging and printing from microscopic images to provide tactile representations for visually impaired people. The aim is to take the world seen through a microscope and make it accessible to those with visual impairments​ using tactile 3D printed models​.

Up to £20,000 is available to support winning applicants in the development of employment solutions focused around mobile in Bangladesh. Mobile technology can act as a bridge to employment opportunities by helping people learn skills, increasing awareness of job opportunities and helping to get and retain employment opportunities.

The London 2012 Olympic and Paralympic Games were hosted at the Queen Elizabeth Olympic Park (QEOP) with the view of creating a dynamic new heart of east London. The park was designed to continue the legacy of the Paralympic Games and to create a diverse and inclusive space for all.

Our project contributes to this vision by (i) engaging the disabled community of east London in a conversation about their experiences and perceptions of the QEOP and then (ii) co-creating a multisensory representation of the experience of blind people as a reminder of diversity and inclusion at the park.

GDI Hub is conducting a Global Survey on behalf of the World Bank to understand the level of access and the impact of technology on education for children with disabilities. We are inviting all individuals, researchers, educators and other professionals who have relevant experience on EdTech and Inclusive education to fill in this short survey.

Global logistics have been compromised by lockdowns and border controls across Africa and other low to middle-income countries (LMICs), leaving many businesses and citizens without key parts of their supply chain. This condition has exposed the rigid, inflexible state of production in many settings, demonstrating the need for locally resilient, flexible production ecosystems. LPLS is working to develop broader, restorative, and agile supply systems, while providing people with the life-saving health and community resources they need to face current restrictions.

This current work looks to develop these capabilities in soft material technology, with: the development of a printable nanocomposite stretch sensor system; a low-cost digital method for casting bespoke prosthetic liners; a liner with an embedded stretch sensor for growth / volume tracking; a model liner with an embedded active cooling system.

Running is not only about distance or speed but more a dynamic experiential journey in which emotions and subjective feelings play vital roles in constructing the runners’ experience. This research investigates how technology could support runners with the capturing and sharing of such experiential aspects of running experience beyond the running performance that current mainstream technologies provide.

Tacilia is a Voice Controlled Tactile User Interface for Blind Learners which is based on a novel shape changing material technology and an advanced speech recognition AI.

There is huge potential for mobile technology to improve blind and partially sighted people's experience of parks and open spaces and enable them to share these experiences with others. We are creating an accessible crowdsourced mapping system for BPSP to contribute their experience of visiting a park or open space and share these experiences in the forms of textual information, photos, sound bites, and videos to enable other people to enjoy these experiences anywhere in the world.

“This Is the Story of Community Leadership with Political Backing. (PM1)”. Critical Junctures in Paralympic Legacy: Framing the London 2012 Disability Inclusion Model for New Global Challenges.

Arts Collaboration Opportunities in Teaching and Research (ACTOR). ACTOR adopts an approach that brings play, exploration, and creativity together, using workshops and other interactive designs to engage and share and communicate experiences.

Participatory case studies on inclusive design and accessibility in cities. Creating enabling environments and infrastructure for assistive technology users through inclusive design.

The aim of the network proposal was to raise awareness within the communities of Southern Africa of the value of their cultural heritage and provide insights into how these may be expressed through inclusive crafts, leading to sustainable economic development.

This project searches and collates population-level data on the need and coverage for assistive technology, in the forms of scoping and systematic reviews, as well as a publicly accessible data repository.

Building a transdisciplinary network to improve AT by generating novel design, engineering and technological advances that will empower disabled people, older people and carers through accessible and local solutions.

A World Bank review, authored by GDI Hub, looking at the current status and trends in the practice of educational technology (EdTech) and the use of ICT in improving the educational participation and outcomes of children with disabilities.

This project is investigating the potential to strengthen local systems of AT provision and innovation to address gaps in service. Where could more localised product and service innovation complement global supply chains to unlock more sustainable and resilient AT ecosystems ? We believe there is an opportunity to create better connections between the AT community and local manufacturers, with both newer digital and traditional fabrication expertise to enable innovation and better support for AT users beyond initial provision.

This project is developing product-service innovation around local production and repair

Our current workstreams in Nepal: This project is investigating the potential to strengthen local systems of AT provision and innovation to address gaps in service.

Highly individual and customised needs are an area that global markets do not currently address well. This workstream is exploring the potential to support the development of local innovation ecosystems of assistive technology to address these gaps in service.

The Enabling Fridays Community Nepal want to bring together local and global expertise working in the AT sector to identify routes that would unlock local innovation, and improve current gaps in service.

Based on the decisions of the Enabling Fridays Community, we are conducting a Situational Analysis of Manual wheelchair provision to inform our local actions

Partnering with the World Bank, GDI Hub researched and authored the ICT landscape review, exploring the use of ICT in improving the educational participation and outcomes of children with disabilities.

Measuring the impact of AT on the lives of people with disabilities.

In this workshop, we aim to bring together researchers, designers, and practitioners to explore effective strategies and brainstorm actionable guidelines for supporting disability inclusive online research methods and platforms.