Publications

Background

Assistive technology is central to the realization of the rights of persons with disabilities. However, there remains limited access to assistive technology throughout much of the world, with particularly poor access in lower- and middle-income countries. Evaluating stakeholder engagement in assistive technology networks has been used as a successful strategy to understand and address gaps in the assistive technology ecosystem.

Objective

The objective of this research was to provide an overview of the Kenyan Assistive Technology Ecosystem, including available assistive products and related services, and an understanding of the nature and strength of relationships between stakeholders

Methods

In this study, we employed an online qualitative stakeholder survey (2021) with representatives of organizations involved in assistive technology in Kenya.

Results

The assistive technology network in Kenya is distributed, with Government Ministries and Agencies and Organizations of persons with disabilities central to the network. The strength of relationships is concentrated on awareness and communication, with fewer organizations actively collaborating. Innovation training organizations are not yet well integrated into the network.

Conclusions

Improving access to assistive technology in Kenya will benefit from greater collaboration amongst all assistive technology stakeholders.

To cite this article:

1. Emma M. Smith, Stephanie Huff, Rose Bukania, Bernard Chiira, Catherine Holloway & Malcolm MacLachlan (2024) The Kenyan assistive technology ecosystem: a network analysis, Global Health Action, 17:1, DOI: 10.1080/16549716.2024.2302208

Abstract

Purpose

To investigate the practices of repair that exist for users of mobility assistive products in low resource settings, as well as the psychosocial impact that the repair, or non-repair, of these devices has on users’ lives.

Materials and Methods

This article collates data on repair practices and the responses from participants on the topic of repair from studies conducted by the authors across four different low resource settings in Kenya, Uganda, Sierra Leone, and Indonesia. This data was then analyzed to identify the common themes found across geographies.

Results

Three major models of repair practice emerged from the data: “Individual or Informal Repair in the Community”; “Local Initiatives”; and “Specialist AT Workshop Repair”. Additionally, the wider impact on the participants’ lives of “Problems & Concerns with Repair”; “Experiences of Breakages & Frequencies of Repair” and the “Impact of Broken Devices” are explored.

Conclusions

The results of this analysis demonstrate the paramount importance of community-based repair of devices, and how despite this importance, repair is often overlooked in the planning and design of assistive products and services. There is a need to further incorporate and support these informal contributions as part of the formal provision systems of assistive device.

Ben Oldfrey, Cathy Holloway, Julian Walker, Steven McCormack, Bernadette Deere, Laurence Kenney, Robert Ssekitoleko, Helen Ackers & Mark Miodownik (2023) Repair strategies for assistive technology in low resource settings, Disability and Rehabilitation: Assistive Technology, DOI: 10.1080/17483107.2023.2236142

Purpose

Explicitly monitoring the need, use and satisfaction of assistive product (AP) provision is essential to support population health and healthy longevity in ageing/aged countries, like Korea. We present findings from the 2017 Korea National Disability Survey (NDS) on AP access and compare them to international averages, introducing Korea’s data into the wider coherence of global AP research.

Materials and methods

Using data from Korea’s 2017 NDS, surveying 91,405 individuals, we extracted and calculated AP access indicators, including needing, having, using and being satisfied with 76 unique APs, by functional difficulty and product type. We compared satisfaction and unmet need between the National Health Insurance System (NHIS) and alternative provision services.

Results

Prosthetics and orthotics had high rates of under-met need, and lower satisfaction rates, from 46.9% to 80.9%. Mobility APs overall had higher rates of under-met need. There was either low (<5%) or no reported need for most digital/technical APs. Among main products, those provided through the NHIS had lower unmet need (26.4%) than through alternative providers (63.1%), though satisfaction rates were similar (p < .001).

Conclusions

The Korean survey findings align with global averages calculated in the Global Report on Assistive Technology. Low reported needs for certain APs may reflect low awareness about how these products could benefit users, emphasizing the importance of data collection at each stage of the AP provision process. Recommendations to expand access to APs are given for people, personnel, provision, products, and policy.

Implications for rehabilitation

• Access to assistive products (APs) is an essential part of physical and occupational therapy services and rehabilitation. Monitoring population-level data on disability and AP access can inform policymakers about a key aspect of population health and healthy ageing, and demonstrate the need to expand access by including APs and associated services in primary/universal healthcare packages.
• Stratifying findings about AP access by type of functional difficulty and further by specific device helps identify the populations for whom needs are not being met. These domain-level and device-level indicators inform efforts to support specific groups within the population of people with disabilities, which has implications for how rehabilitation services are provisioned, targeted and made more accessible.

Jamie Danemayer & Myung-Joon Lim (2023)

Assistive technology in Korea: Findings from the 2017 National Disability Survey, Disability and Rehabilitation: Assistive Technology,

DOI: 10.1080/17483107.2023.2225565

The aim of this research was to undertake a Country Capacity Assessment (CCA) to inform a more integrated approach to Assistive Technology (AT) provision in England. The results aim to support policymakers in identifying actions to strengthen service delivery to better meet disabled people’s needs, improving outcomes for AT users and reducing inefficiencies in the current approach.

The research was undertaken from November 2022 to March 2023 and led by the Global Disability Innovation (GDI) Hub, which is the World Health Organization (WHO) Global Collaborating Centre on AT access, using WHO tools in the Assistive Technology Assessment (ATA) suite.

Suggested Citation: Austin, V, Patel, D, Danemayer, J, Mattick, K, Landre, A, Smitova, M, Bandukda, M, Healy, A, Chockalingam, N, Bell D, and Holloway, C; Assistive Technology Changes Lives: an assessment of AT need and capacity in England; Cabinet Office, HMG; 2023

Ninety percent of the 1.2 billion people who need assistive technology (AT) do not have access. Information seeking practices directly impact the ability of AT producers, procurers, and providers (AT professionals) to match a user's needs with appropriate AT, yet the AT marketplace is interdisciplinary and fragmented, complicating information seeking. We explored common limitations experienced by AT professionals when searching information to develop solutions for a diversity of users with multi-faceted needs. Through Template Analysis of 22 expert interviews, we find current search engines do not yield the necessary information, or appropriately tailor search results, impacting individuals’ awareness of products and subsequently their availability and the overall effectiveness of AT provision. We present value-based design implications to improve functionality of future AT-information seeking platforms, through incorporating smarter systems to support decision-making and need-matching whilst ensuring ethical standards for disability fairness remain.

Background:

Many people with amputations who live in low-resourced settings struggle to access the workshops where qualified prosthetists provide appropriate care. Novel technologies such as the thermoplastic Confidence Socket are emerging, which could help facilitate easier access to prosthetic services.

Objectives:

The objective of this study was to evaluate the satisfaction and the performance of transtibial prosthesis featuring the Confidence Socket.

Study design:

This is a longitudinal repeated-measures design study.

Methods:

A convenience sample of 26 participants who underwent transtibial amputation were fitted with the Confidence Socket. The performance of the socket was evaluated after a follow-up period between 1 month and 6 months using the L test of functional mobility and the amputee mobility predictor. Satisfaction with the prosthesis was measured using the Trinity Amputation and Prosthetic Experience Scales and purposefully designed 7-point Likert scales.

Results:

Ten of the 26 participants returned for follow-up. Perceived activity restriction and L test times improved significantly at follow-up, but the self-reported satisfaction with the Confidence Socket was lower at follow-up compared with that after fitting.

Conclusions:

The Amparo Confidence Socket represents a potentially viable alternative to improve access to appropriate prosthesis in Kenya, but some aspects of users’ self-reported satisfaction should be further investigated.

Barbareschi G, Teerlink W, Njuguna JG, Musungu P, Kirino MD, Holloway C. Evaluating the use of a thermoplastic socket in Kenya: A pilot study. Prosthet Orthot Int. 2022 Oct 1;46(5):532-537. doi: 10.1097/PXR.0000000000000130. Epub 2022 Mar 25. PMID: 35333813; PMCID: PMC9554758.

Innovative, responsible data use is a critical need in the global response to the coronavirus disease-2019 (COVID-19) pandemic. Yet potentially impactful data are often unavailable to those who could utilize it, particularly in data-poor settings, posing a serious barrier to effective pandemic mitigation. Data challenges, a public call-to-action for innovative data use projects, can identify and address these specific barriers. To understand gaps and progress relevant to effective data use in this context, this study thematically analyses three sets of qualitative data focused on/based in low/middle-income countries: (a) a survey of innovators responding to a data challenge, (b) a survey of organizers of data challenges, and (c) a focus group discussion with professionals using COVID-19 data for evidence-based decision-making. Data quality and accessibility and human resources/institutional capacity were frequently reported limitations to effective data use among innovators. New fit-for-purpose tools and the expansion of partnerships were the most frequently noted areas of progress. Discussion participants identified building capacity for external/national actors to understand the needs of local communities can address a lack of partnerships while de-siloing information. A synthesis of themes demonstrated that gaps, progress, and needs commonly identified by these groups are relevant beyond COVID-19, highlighting the importance of a healthy data ecosystem to address emerging threats. This is supported by data holders prioritizing the availability and accessibility of their data without causing harm; funders and policymakers committed to integrating innovations with existing physical, data, and policy infrastructure; and innovators designing sustainable, multi-use solutions based on principles of good data governance.

Danemayer, J., Young, A., Green, S., Ezenwa, L., & Klein, M. (2023). Responding to the coronavirus disease-2019 pandemic with innovative data use: The role of data challenges. Data & Policy, 5, E11. doi:10.1017/dap.2023.6

Living in an informal settlement with a visual impairment can be very challenging resulting in social exclusion. Mobile phones have been shown to be hugely beneficial to people with sight loss in formal and high-income settings. However, little is known about whether these results hold true for people with visual impairment (VIPs) in informal settlements. We present the findings of a case study of mobile technology use by VIPs in Kibera, an informal settlement in Nairobi. We used contextual interviews, ethnographic observations and a co-design workshop to explore how VIPs use mobile phones in their daily lives, and how this use influences the social infrastructure of VIPs. Our findings suggest that mobile technology supports and shapes the creation of social infrastructure. However, this is only made possible through the existing support networks of the VIPs, which are mediated through four types of interaction: direct, supported, dependent and restricted.

Giulia Barbareschi, Catherine Holloway, Katherine Arnold, Grace Magomere, Wycliffe Ambeyi Wetende, Gabriel Ngare, and Joyce Olenja. 2020. The Social Network: How People with Visual Impairment use Mobile Phones in Kibera, Kenya. In Proceedings of the 2020 CHI Conference on Human Factors in Computing Systems (CHI '20). Association for Computing Machinery, New York, NY, USA, 1–15. https://doi.org/10.1145/331383...

Assistive technology is a critical component of maintaining health, wellbeing, and the realization of rights for persons with disabilities. Assistive technologies, and their associated services, are also paramount to ensuring individuals with functional limitations have access to important health and social service information, particularly during a pandemic where they may be at higher risk than the general population. Social isolation and physical distancing have further marginalized many within this population. We have an opportunity to learn from the COVID-19response to develop more inclusive and resilient systems that will serve people with disabilities more effectively in the future. In this Current Issues piece, we present a starting point for discussion, based on our experiences working to promote access to assistive technologies through inclusive and sustainable systems and policies.

Emma M. Smith, Malcolm MacLachlan, Ikenna D. Ebuenyi, Catherine Holloway & Victoria Austin (2021) Developing inclusive and resilient systems: COVID-19 and assistive technology, Disability & Society, 36:1, 151-154, DOI: 10.1080/09687599.2020.1829558

Abstract

Background: The coronavirus disease 2019 (COVID-19) pandemic has impacted all segments of society, but it has posed particular challenges for the inclusion of persons with disabilities, those with chronic illness and older people regarding their participation in daily life. These groups often benefit from assistive technology (AT) and so it is important to understand how use of AT may be affected by or may help to mitigate the impacts of COVID-19. Objective: The objectives of this study were to explore the how AT use and provision have been affected during the initial stages of the COVID-19 pandemic, and how AT policies and systems may be made more resilient based on lessons learned during this global crisis.

Methods: This study was a rapid, international online qualitative survey in the 6 United Nations (UN) languages (English, French, Spanish, Russian, Arabic, Mandarin Chinese) facilitated by extant World Health Organization (WHO) and International Disability Alliance networks. Themes and subthemes of the qualitative responses were identified using Braun and Clarke's 6-phase analysis.

Results: Four primary themes were identified in in the data: Disruption of Services, Insufficient Emergency Preparedness, Limitations in Existing Technology, and Inadequate Policies and Systems. Subthemes were identified within each theme, including subthemes related to developing resilience in AT systems, based on learning from the pandemic.

Conclusion: COVID-19 has disrupted the delivery of AT services, primarily due to infection control measures resulting in lack of provider availability and diminished one-to-one services. This study identified a need for stronger user-centred development of funding policies and infrastructures that are more sustainable and resilient, best practices for remote service delivery, robust and accessible tools and systems, and increased capacity of clients, caregivers, and clinicians to respond to pandemic and other crisis situations.

Smith EM, Toro Hernandez ML, Ebuenyi ID, Syurina EV, Barbareschi G, Best KL, Danemayer J, Oldfrey B, Ibrahim N, Holloway C, MacLachlan M. Assistive Technology Use and Provision During COVID-19: Results From a Rapid Global Survey. Int J Health Policy Manag. 2022 Jun 1;11(6):747-756. doi: 10.34172/ijhpm.2020.210. PMID: 33201656;

Development outcomes are inextricably linked to the health of the marketplace that delivers products and services to people in low- and middle-income countries (LMIC). Shortcomings in the market for assistive technology (AT) contribute to low access in LMIC. Market shaping is aimed at improving a market’s specific outcomes, such as access to high quality, affordable AT, by targeting the root causes of these shortcomings. The paper summarizes the findings of market analyses conducted under the UK aid funded AT2030 programme in support of ATscale and aims to discuss how market shaping can help more people gain access to the AT that they need and what are the best mechanisms to unlock markets and commercial opportunity in LMICs. The paper also explores how market shaping for AT markets could be part of a mission-oriented approach AT policy. A mission-oriented approach can help accelerate progress toward a common objective among stakeholders, at country or global level. While market-shaping activities direct the outcomes of the market toward a specific end goal, such as access to quality, affordable products and services, missions are more comprehensive and include other policy interventions and stakeholder collaborations in order to create a robust and sustainable structure.

Margaret Savage, Sarah Albala, Frederic Seghers, Rainer Kattel, Cynthia Liao, Mathilde Chaudron & Novia Afdhila (2021) Applying market shaping approaches to increase access to assistive technology in low- and middle-income countries, Assistive Technology, 33:sup1, 124-135, DOI: 10.1080/10400435.2021.1991050

Functional limitations become more prevalent as populations age, emphasising an increasingly urgent need for assistive technology (AT). Critical to meeting this need trajectory is understanding AT access in older ages. Yet few publications examine this from a longitudinal perspective.

This review aims to identify and collate what data exist globally, seeking all population-based cohorts and repeated cross-sectional surveys through the Maelstrom Research Catalogue (searched May 10, 2022) and the Disability Data Report (published 2022), respectively. Datasets incorporating functional limitations modules and question(s) dedicated to AT, with a wave of data collection since 2009, were included.

Of 81 cohorts and 202 surveys identified, 47 and 62 meet inclusion criteria, respectively. Over 40% of cohorts were drawn from high-income countries which have already experienced significant population ageing. Cohorts often exclude participants based on pre-existing support needs. For surveys, Africa is the most represented region (40%). Globally, 73% of waves were conducted since 2016. 'Use' is the most collected AT access indicator (69% of cohorts and 85% of surveys). Glasses (78%) and hearing aids (77%) are the most represented AT. While gaps in data coverage and representation are significant, collating existing datasets highlights current opportunities for analyses and methods for improving data collection across the sector.

Danemayer, J., Mitra, S., Holloway, C. and Hussein, S. (2023) “Assistive technology access in longitudinal datasets: a global review”, International Journal of Population Data Science, 8(1). doi: 10.23889/ijpds.v8i1.1901.

Introduction: To improve access to assistive products (APs) globally, data must be available to inform evidence based decision-making, policy development and evaluation, and market-shaping interventions.

Methods: This systematic review was undertaken to identify studies presenting population-based estimates of need and coverage for five APs (hearing aids, limb prostheses, wheelchairs, glasses and personal digital assistants) grouped by four functional domains (hearing, mobility, vision and cognition).

Results: Data including 656 AP access indicators were extracted from 207 studies, most of which (n=199, 96%) were cross-sectional, either collecting primary (n=167) or using secondary (n=32) data. There was considerable heterogeneity in assessment approaches used and how AP indicators were reported; over half (n=110) used a combination of clinical and self-reported assessment data. Of 35 studies reporting AP use out of all people with functional difficulty in the corresponding functional domains, the proportions ranged from 4.5% to 47.0% for hearing aids, from 0.9% to 17.6% for mobility devices, and from 0.1% to 86.6% for near and distance glasses. Studies reporting AP need indicators demonstrated >60% unmet need for each of the five APs in most settings.

Conclusion: Variation in definitions of indicators of AP access have likely led to overestimates/underestimates of need and coverage, particularly, where the relationship between functioning difficulty and the need for an AP is complex. This review demonstrates high unmet need for APs globally, due in part to disparate data across this sector, and emphasises the need to standardise AP data collection and reporting strategies to provide a comparable evidence base to improve access to APs.

Danemayer J, Boggs D, Delgado Ramos V, et al. Estimating need and coverage for five priority assistive products: a systematic review of global population-based research. BMJ Global Health 2022;7:e007662. doi:10.1136/bmjgh-2021-007662

Artificial Intelligence (AI) in Education has been said to have the potential for building more personalised curricula, as well as democratising education worldwide and creating a Renaissance of new ways of teaching and learning. Millions of students are already starting to benefit from the use of these technologies, but millions more around the world are not. If this trend continues, the first delivery of AI in Education could be greater educational inequality, along with a global misallocation of educational resources motivated by the current technological determinism narrative. In this paper, we focus on speculating and posing questions around the future of AI in Education, with the aim of starting the pressing conversation that would set the right foundations for the new generation of education that is permeated by technology. This paper starts by synthesising how AI might change how we learn and teach, focusing specifically on the case of personalised learning companions, and then move to discuss some socio-technical features that will be crucial for avoiding the perils of these AI systems worldwide (and perhaps ensuring their success). This paper also discusses the potential of using AI together with free, participatory and democratic resources, such as Wikipedia, Open Educational Resources and open-source tools. We also emphasise the need for collectively designing human-centered, transparent, interactive and collaborative AI-based algorithms that empower and give complete agency to stakeholders, as well as support new emerging pedagogies. Finally, we ask what would it take for this educational revolution to provide egalitarian and empowering access to education, beyond any political, cultural, language, geographical and learning ability barriers.

Extracting useful information from the user history to clearly understand informational needs is a crucial feature of a proactive information retrieval system. Regarding understanding information and relevance, Wikipedia can provide the background knowledge that an intelligent system needs. This work explores how exploiting the context of a query using Wikipedia concepts can improve proactive information retrieval on noisy text. We formulate two models that use entity linking to associate Wikipedia topics with the relevance model. Our experiments around a podcast segment retrieval task demonstrate that there is a clear signal of relevance in Wikipedia concepts while a ranking model can improve precision by incorporating them. We also find Wikifying the background context of a query can help disambiguate the meaning of the query, further helping proactive information retrieval.

Purpose
To explore the personal and system factors that motivate and enhance outcomes for patients accessing a prosthetic service and using a lower-limb prosthesis within a low resource setting.

Materials and methods
This study employed a qualitative approach to explore the motivations and satisfaction of individuals with lower limb loss engaging with a prosthetic service in Mombasa, Kenya. In-depth interviews were conducted over Microsoft Teams with 10 lower limb prosthesis users and thematic analysis was applied.

Results
Five key themes emerged: acceptance, self-determination, hope, clinician relationship and perception. These findings demonstrate the importance of hopeful thinking and a supportive community in overcoming physical and stigmatising challenges. The findings further highlight the value of the service provider relationship beyond just prescribing an assistive device.

Conclusion
These results have relevance in developing patient-centred services, assistive devices and personnel training that are responsive, motivating, and cognisant of the service user. This is of particular interest as assistive technology services are newly developed in low resource settings.

Kate Mattick, Ben Oldfrey, Maggie Donovan-Hall, Grace Magomere, Joseph Gakunga & Catherine Holloway (2022) Experiences of lower limb prosthesis users in Kenya: a qualitative study to understand motivation to use and satisfaction with prosthetic outcomes, Disability and Rehabilitation, DOI: 10.1080/09638288.2022.2152875

Elastomeric liners are commonly worn between the prosthetic socket and the limb. A number of improvements to the state of the art of liner technology are required to address outstanding problems. A liner that conforms to the residuum more accurately, may improve the skin health at the stump-socket interface. Previous work has shown that for effective thermal management of the socket environment, an active heat removal system is required, yet this is not available. Volume tracking of the stump could be used as a diagnostic tool for looking at the changes that occur across the day for all users, which depend on activity level, position, and the interaction forces of the prosthetic socket with the limb. We believe that it would be advantageous to embed these devices into a smart liner, which could be replaced and repaired more easily than the highly costly and labour-intensive custom-made socket. This paper presents the work to develop these capabilities in soft material technology, with: the development of a printable nanocomposite stretch sensor system; a low-cost digital method for casting bespoke prosthetic liners; a liner with an embedded stretch sensor for growth / volume tracking; a model liner with an embedded active cooling system.

, Additive manufacturing techniques for smart prosthetic liners, Medical Engineering & Physics, Volume 87, 2021, Pages 45-55, ISSN 1350-4533, https://doi.org/10.1016/j.mede....

Disability stigma in many low- and middle-income countries represents one of the most pervasive barriers preventing people with disabilities from accessing equal rights and opportunities, including the uptake of available assistive technology (AT). Previous studies have rarely examined how disability stigma may be shaped through factors endemic to social interactions, including how the use of assistive technology itself may precipitate or alleviate disability stigma. Through two strands of work, we address this gap. Via a series of focus groups with Kenyans without disabilities (Study 1) and secondary data analysis of consultations with Kenyans with disabilities and their allies (Study 2), we identify shared and divergent understandings of what shapes disability stigma and discrimination. Specifically, Kenyans with and without disabilities were cognizant of how religious/spiritual interpretations of disability, conceptions of impairments as “different” from the norm, and social stereotypes about (dis)ability shaped the experience of stigma and discrimination. Moreover, both groups highlighted assistive technology as an influential factor that served to identify or “mark” someone as having a disability. However, whereas participants without disabilities saw assistive technology purely as an enabler to overcome stigma, participants with disabilities also noted that, in some cases, use of assistive technologies would attract stigma from others.

Barbareschi G, Carew MT, Johnson EA, Kopi N, Holloway C. “When They See a Wheelchair, They’ve Not Even Seen Me”—Factors Shaping the Experience of Disability Stigma and Discrimination in Kenya. International Journal of Environmental Research and Public Health. 2021; 18(8):4272. https://doi.org/10.3390/ijerph...

Kett, M.; Holloway, C.; Austin, V. Critical Junctures in Assistive Technology and Disability Inclusion. Sustainability 2021, 13, 12744. https://doi.org/10.3390/su1322...

Johan Borg, Wei Zhang, Emma M. Smith & Cathy Holloway (2021) Introduction to the companion papers to the global report on assistive technology, Assistive Technology, 33:sup1, 1-2, DOI: 10.1080/10400435.2021.2003658

The supply of and market demand for assistive products (APs) are complex and influenced by diverse stakeholders. The methods used to collect AP population-level market data are similarly varied. In this paper, we review current population-level AP supply and demand estimation methods for five priority APs and provide recommendations for improving national and global AP market evaluation. Abstracts resulting from a systematic search were double-screened. Extracted data include WHO world region, publication year, age-groups, AP domain(s), study method, and individual assessment approach.497 records were identified. Vision-related APs comprised 65% (n = 321 studies) of the body of literature; hearing (n = 59), mobility (n = 24), cognitive (n = 2), and studies measuring multiple domains (n = 92) were proportionately underrepresented. To assess individual AP need, 4 unique approaches were identified among 392 abstracts; 45% (n = 177) used self-report and 84% (n = 334) used clinical evaluation. Study methods were categorized among 431 abstracts; Cross-sectional studies (n = 312, 72%) and secondary analyses of cross-sectional data (n = 61, 14%) were most common. Case studies illustrating all methods are provided. Employing approaches and methods in the contexts where they are most well-suited to generate standardized AP indicators will be critical to further develop comparable population-level research informing supply and demand, ultimately expanding sustainable access to APs.

Jamie Danemayer, Dorothy Boggs, Emma M. Smith, Vinicius Delgado Ramos, Linamara Rizzo Battistella, Cathy Holloway & Sarah Polack (2021) Measuring assistive technology supply and demand: A scoping review, Assistive Technology, 33:sup1, S35-S49, DOI: 10.1080/10400435.2021.1957039

Humanitarian coordination systems increasingly recognize and aim to respond to the needs of people with disabilities within populations affected by crises, spurred on by the UN Convention on the Rights of Persons with Disabilities (CRPD) which was adopted in 2006. Many agencies state their aim to meet the requirements of the CRPD using a “twin track” approach: ensuring the inclusion of people with disabilities in mainstream provision, alongside targeted support for their needs, which may include the need for Assistive Technology (AT). However, there is very little evidence of AT provision in humanitarian settings, which is a specific and urgent need for many people including the elderly and people with disabilities, and an implicit requirement of Article 11 of the CRPD and World Health Assembly resolution on improving access to assistive technology. There is also little evidence of effective mechanisms for AT provision in humanitarian settings. This is despite high and growing levels of unmet AT need in crises, and despite the legally binding requirement in the CRPD to provide AT for those who need it. AT provision faces unique challenges in humanitarian settings. This paper discusses the evidence available in the literature for the scale and quality of AT provision interventions in crises, and what is known about the challenges and facilitators of provision. We conducted a search of the academic literature and retained literature that reported on any form of AT provision following crisis, where international humanitarian response was in place, published in English between January 2010 and June 2020. We found very few examples in that academic literature of systematic and coordinated AT provision at the acute stage of crisis, and even less in the preparedness and post-acute stages. However, it is difficult to assess whether this is the result of insufficient academic attention or reflects a lack of provision. The small body of academic literature that describes AT provision in humanitarian settings paints a picture of small-scale provision, specialized to single types of impairments, and delivered by predominantly by NGOs. We also conducted a search of the gray literature, using the same inclusion criteria, in two countries: Afghanistan and South Sudan (case studies forthcoming). This gray literature provided supplementary evidence of the types of AT providers and AT provision available in those protracted crises. There are very few examples of how AT services can be scaled up (from a very low baseline) and maintained sustainably within a strengthened health system. The literature also describes more examples of provision of assistive products for mobility over assistive products for other impairments. If the paucity of literature on AT provision in humanitarian settings is a reflection of the scale of provision, this implies a deficiency in humanitarian response when it comes to providing people with AT needs with the essential products and services to which they have a right, and which will enable their access to basic, life-saving assistance. We conclude by providing recommendations for urgent actions that the AT and humanitarian community must take to fill this critical gap in the provision of essential products and services for a potentially marginalized and excluded group.

Golnaz Whittaker, Gavin Adam Wood, Giulia Oggero, Maria Kett & Kirstin Lange (2021) Meeting AT needs in humanitarian crises: The current state of provision, Assistive Technology, 33:sup1, S3-S16, DOI: 10.1080/10400435.2021.1934612

Innovations in the field of assistive technology are usually evaluated based on practical considerations related to their ability to perform certain functions. However, social and emotional aspects play a huge role in how people with disabilities interact with assistive products and services. Over a five months period, we tested an innovative wheelchair service provision model that leverages 3D printing and Computer Aided Design to provide bespoke wheelchairs in Kenya. The study involved eight expert wheelchair users and five healthcare professionals who routinely provide wheelchair services in their community. Results from the study show that both users and providers attributed great value to both the novel service delivery model and the wheelchairs produced as part of the study. The reasons for their appreciation went far beyond the practical considerations and were rooted in the fact that the service delivery model and the wheelchairs promoted core values of agency, empowerment and self-expression.

Globally, mobile technology plays a significant role connecting and supporting people with disabilities. However, there has been limited research focused on understanding the impact of mobile technology in the lives of persons with disabilities in low or middle- income countries. This paper presents the findings of a participatory photovoice study looking at the role that mobile phones play in the daily lives of 16 persons with disabilities in Kenya and Bangladesh. Participants used a combination of pictures and voice recordings to capture their own stories and illustrate the impact that mobile phone use has on their lives. Through thematic analysis, we categorized the benefits of mobile phones captured by participants as 1) Improved social connection; 2) Increased independence and 3) Access to opportunities. While mobile phones are ubiquitously used for communication, for persons with disabilities they become essential assistive technologies that bridge barriers to opportunities which are not accessible otherwise. Our paper adds evidence to the need for mobile phones for persons with disabilities to enable communication and connectivity in support of development.

N. Jahan et al., "Inclusion and Independence: The impact of Mobile Technology on the Lives of Persons with Disabilities in Kenya and Bangladesh," 2020 IEEE Global Humanitarian Technology Conference (GHTC), Seattle, WA, USA, 2020, pp. 1-8, doi: 10.1109/GHTC46280.2020.9342934.

From multiple studies conducted through the FCDO AT2030 Programme, as well as key literature, we examine whether Assistive Technology (AT) provision models could look towards more sustainable approaches, and by doing this benefit not only the environment, but also address the problems that the current provision systems have. We show the intrinsic links between disability inclusion and the climate crisis, and the particular vulnerability people with disabilities face in its wake. In particular, we discuss how localised circular models of production could be beneficial, facilitating context driven solutions and much needed service elements such as repair and maintenance. Key discussion areas include systems approaches, digital fabrication, repair and reuse, and material recovery. Finally, we look at what needs be done in order to enable these approaches to be implemented. In conclusion, we find that there are distinct parallels between what AT provision models require to improve equitable reliable access, and strategies that could reduce environmental impact and bring economic benefit to local communities. This could allow future AT ecosystems to be key demonstrators of circular models, however further exploration of these ideas is required to make sense of the correct next steps. What is key in all respects, moving forward, is aligning AT provision with sustainability interventions.

Oldfrey, B.; Barbareschi, G.; Morjaria, P.; Giltsoff, T.; Massie, J.; Miodownik, M.; Holloway, C. Could Assistive Technology Provision Models Help Pave the Way for More Environmentally Sustainable Models of Product Design, Manufacture and Service in a Post-COVID World? Sustainability 2021, 13, 10867. https://doi.org/10.3390/su1319...

It is essential to understand the strategies and processes which are deployed currently across the Assistive Technology (AT) space toward measuring innovation. The main aim of this paper is to identify functional innovation strategies and processes which are being or can be deployed in the AT space to increase access to AT globally. We conducted a scoping review of innovation strategies and processes in peer-reviewed literature databases and complemented this by identifying case studies demonstrating innovation strategies. The review includes WHO world region, publication year, AT type and a sector analysis against the Systems-Market for Assistive and Related Technologies Framework. We analyzed the case studies and interviews using thematic analysis. We included 91 papers out of 3,127 after review along with 72 case studies. Our results showed that product innovations were more prevalent than provision or supply innovations across papers and case studies. Case studies yielded two themes: open innovation (OI); radical and disruptive innovation. Financial instruments which encourage OI are needed and we recommend pursuing OI for AT innovation. Embedding AT within larger societal missions will be key to success governments and investors need to understand what AT is and their translational socioeconomic value.

Catherine Holloway, Dafne Zuleima Morgado Ramirez, Tigmanshu Bhatnagar, Ben Oldfrey, Priya Morjaria, Soikat Ghosh Moulic, Ikenna D. Ebuenyi, Giulia Barbareschi, Fiona Meeks, Jessica Massie, Felipe Ramos-Barajas, Joanne McVeigh, Kyle Keane, George Torrens, P. V.M. Rao, Malcolm MacLachlan, Victoria Austin, Rainer Kattel, Cheryl D Metcalf & Srinivasan Sujatha (2021) A review of innovation strategies and processes to improve access to AT: Looking ahead to open innovation ecosystems, Assistive Technology, 33:sup1, 68-86, DOI: 10.1080/10400435.2021.1970653

For many years, the biggest issue that causes discomfort and hygiene issues for patients with lower limb amputations have been the interface between body and prosthetic, the socket. Often made of an inflexible, solid polymer that does not allow the residual limb to breathe or perspire and with no consideration for the changes in size and shape of the human body caused by changes in temperature or environment, inflammation, irritation and discomfort often cause reduced usage or outright rejection of the prosthetic by the patient in their day to day lives. To address these issues and move towards a future of improved quality of life for patients who suffer amputations, Loughborough University formed the Next Generation Prosthetics research cluster. This work is one of four multidisciplinary research studies conducted by members of this research cluster, focusing on the area of Computer Aided Design (CAD) for improving the interface with Additive Manufacture (AM) to solve some of the challenges presented with improving prosthetic socket design, with an aim to improve and streamline the process to enable the involvement of clinicians and patients in the design process. The research presented in this thesis is based on three primary studies. The first study involved the conception of a CAD criteria, deciding what features are needed to represent the various properties the future socket outlined by the research cluster needs. These criteria were then used for testing three CAD systems, one each from the Parametric, Non Uniform Rational Basis Spline (NURBS) and Polygon archetypes respectively. The result of these tests led to the creation of a hybrid control workflow, used as the basis for finding improvements. The second study explored emerging CAD solutions, various new systems or plug-ins that had opportunities to improve the control model. These solutions were tested individually in areas where they could improve the workflow, and the successful solutions were added to the hybrid workflow to improve and reduce the workflow further. The final study involved taking the knowledge gained from the literature and the first two studies in order to theorise how an ideal CAD system for producing future prosthetic sockets would work, with considerations for user interface issues as well as background CAD applications. The third study was then used to inform the final deliverable of this research, a software design specification that defines how the system would work. This specification was written as a challenge to the CAD community, hoping to inform and aid future advancements in CAD software. As a final stage of research validation, a number of members of the CAD community were contacted and interviewed about their feelings of the work produced and their feedback was taken in order to inform future research in this area.

Bodkin, Troy L. (2017): Specifying a hybrid, multiple material CAD system for next-generation prosthetic design. Loughborough University. Thesis. https://hdl.handle.net/2134/25...;